Red Light Panel 60F

The Red Light Panel 60F is a high‑output, multi‑wavelength therapy panel built for targeted recovery, skin renewal, and deeper tissue support. With five therapeutic wavelengths (630, 660, 810, 830, 850 nm) and 60 LEDs arranged for even coverage, the 60F delivers clinical‑grade light intensity in a compact freestanding design for home, studio, or clinic use.

Key Benefits

• Surface skin renewal: 630–660 nm stimulate collagen, reduce fine lines and improve tone.

• Deep tissue repair: 810–850 nm penetrate deeper to support muscle recovery, reduce inflammation, and improve circulation.

• Enhanced modulation: Multiple wavelengths allow combined or single‑wave protocols for tailored results.

• Efficient sessions: High irradiance shortens session time while delivering effective doses.

Main Features

• 60 single‑chip LEDs: 6 × 630 nm + 24 × 660 nm + 3 × 810 nm + 3 × 830 nm + 24 × 850 nm.

• Light density: >180 mW/cm² (high therapeutic output).

• Adjustable optics: 30° / 60° lens options for focused or broader coverage.

• Power: Actual power options 82W / 120W (model dependent).

• Input: 100–240 VAC, 50/60 Hz.

• Digital controls: Timer (10 min default, up to 30 min), dimmer 1–100%, flicker support 1–10,000 Hz.

• Remote control: 2.4G wireless remote supported for hands‑free operation.

• Size & weight: 290 × 210 × 65 mm; gross weight ~3.6 kg.

• Package: Panel, power cable with plug, safety glasses, user manual.

How It Works (plain)

• Light penetrates skin and is absorbed by cell mitochondria.

• Absorbed photons boost cellular energy (ATP), improving repair, circulation, and inflammation control.

• Different wavelengths target different depths and processes — red (630–660 nm) for skin, near‑infrared (810–850 nm) for deeper tissues.

Parts Included

• Red Light Panel

• Remote control

• Protective eyeglasses

• Power cable

Operating Instructions (for Touch Screen)

Troubleshooting guide

Quickly troubleshoot simple issues you might experience with the Red Light Therapy. Please contact a customer support representative for additional assistance. Please do not attempt to repair the Red Light Therapy Panel.

Issue	Possible Reason	How to Resolve
DEVICE IS NOT WORKING	Device is not plugged in. Device is not turned on.	Plug the power cable into the power cable jack on the back of the device. Plug the power cable into a wall outlet. Press red power switch on the back of the device to turn it on.
DEVICE STOPPED WORKING SUDDENLY	Device automatically shuts off after the set working time. If no specific working time is set, the device shuts off after the default working time of 5 mins.	Turn the Light on to begin a new red light therapy session. Wait 6 hours between 30-minute sessions.
PULSED LIGHT IS NOT ON	Pulsed light setting is not selected.	Frequency: It supports 0-10000Hz. • Click the "+" or "-" to adjust the frequency
LED LIGHTS DO NOT APPEAR TO BE ON WHILE DEVICE IS RUNNING.	Near-infrared (NIR) light is not visible to the naked eye.	Please check the current selection mode. The light will be on in the red light mode and the combined mode.

Frequent Questions

How should I use my red light?

For maximizing cellular health, including deep tissue treatment, it is recommended to use your red light every day or at least five times a week. For getting pain relief from strains and aches, three treatments per day are suggested.

Should I wear eye protection?

Your eyes are not accustomed to the red light, and red light may appear very bright. For this reason, we recommend closing your eyes or wear sunglasses. If you have any concerns, consult your trusted healthcare provider.

Why do the near-infrared LEDs on my Red Light Panel look like they are not working?

The human eye can only see wavelengths of light up to 760nm on average. Red therapy uses a wavelength of 810nm&830nm&850nm for the near-infrared LEDs, that a naked human eye cannot observe.

Both near-infrared light at 810nm&830nm&850nm and red light at 630nm&660nm have been designed to improve cellular function. The main difference is that the skin tissues absorb the red light, leading to enhance collagen production and skin health. Near-infrared light at 850 nm is not visible to the human eye. It penetrates deeper tissue, leading to benefits like increased reduced joint pain and muscle recovery.

Can I wear clothes when using the red light ?

Yes, you can wear clothes, or you can be nude during the treatment. The only thing that does matter is the specific area of the body you want to be treated is fully exposed to the body. That area should not be covered by any clothing.

Will the red light interface with the medications I use?

Many clinical studies and researches have proven that light therapy is effective and safe. However, if you are using medications such as Retin A, Digoxin, Tetracycline, or other photosensitizing drugs, we recommend you to consult your healthcare provider or therapist before using the red light.

What is the difference between red and near-infrared wavelengths?

Both near-infrared light at 810nm&830nm&850nm and red light at 630nm&660nm have been designed to improve cellular function. The main difference is that the skin tissues absorb the red light, leading to enhance collagen production and skin health. Near-infrared light at 850 nm is not visible to the human eye. It penetrates deeper tissue, leading to benefits like increased reduced joint pain and muscle recovery.

Is it safe for children to use the red light?

Clinical studies have shown light therapy to be safe and have no side effects. But, before using red light to children, contact your doctor.

Care and cleaning

Before cleaning your device(s), make sure the device(s) are powered off and power cords are unplugged from any power source. Please remove devices from their mounting acces-sories before cleaning. To clean your panel, except lens parts, you can use a microfibre rag with water to clean the body of the device. Do not spray or apply any moisture to the devicedirectly. Be careful when wiping around vented slot openings, LED openings, and any input or output openings to avoid moisture intrusion.

*Caution: Do not use chemical cleaning agents such as alcohol to clean the surface of lens of the device.

Storing the Device(s)

The device and accessories should be stored in a clean and dry location. Storage Condition:

* Temperature 0°C ~ 40°C (32°F -104°F)

* Humidity less than 50% Warranty devices do not require any user maintenance. If the device requires servicing, please contact support at recoverby.info@gmail.com

Warnings

• The appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction.

• Children being supervised not to play with the appliance.

• Please use protection of the eyes against exposure to visible and infrared radiation. Do not stare at the emitter. Read instructions carefully.

• If unexpected side effects, such as itching, occur within 48 h of the first session of using an appliance, medical advice should be sought prior to further exposure.

• The appliance must not be used if the timer is faulty or the filter is broken or removed.

• Do not look directly at the light-emitting side of the device's LED light.

• If the device overheats, turn it off immediately.

• Do not attempt to disassemble the device as this may cause damage to the device.

• Use of accessories other than those specified or provided by the manufacturer.

• If there is sunburn on your body in the past 2 weeks, it is recommended not to use this product.

• This device is an electrical device. To avoid electric shock, adhere to the following:

• Do not drop your device in water or liquids because you may get an electric shock.

• Do not wash electrical parts with water or liquids.

• Do not directly touch the device or touch the plugs or switches with wet hands.

• Do not pull, carry, or lift the device by its cord. If the cord is damaged, do not use the device because you could get an electric shock.

• Do not use the device if it has been dropped, left outside, or has encountered water or liquids.

• Do not use on or near heated surfaces.

• Do not operate this device in areas where it could be exposed to flammable or combustible

products, or where vapours may be present. Explosion of fire may occur.

• Do not use the device if you have open wounds on the body.

• Do not use the device if you have the Fitzpatrick Skin in Type V and Type VI.

• Do not use this device if you are photosensitive.

• Do not use the device if you are pregnant, or breastfeeding, or preparing pregnant.

• Do not use the device if you are taking photosensitive drugs.

• Do not use the device if you have a medical history of seizures that were triggered by light.

• This device is not to be used by disabled, sleeping, or unconscious persons.

• If using the device causes any discomfort, discontinue use immediately.

• If you suspect that you have had a negative reaction from using the device, consult your doctor immediately.

• Do not scratch or damage the device.

• Use indoors only.

• Unplug from outlet when not in use to avoid tripping hazards.

• Do not unplug by pulling directly onto the cord. Grasp the plug itself, not the cord,when unplugging from the outlet.

• Do not store the device in the sun or on a hot surface. High temperatures may be damaging.

The device should be operated, transported and stored in the manner specified in this manual. Failure to use and maintain the device in according with the instructions outlined in this manual will void the warranty.

Be careful to strangulation due to cables, keep away from children.